Variable body safety shower
for installation in suspended ceilings

PremiumLine variable body safety shower

Article no.: BR 089 095 / V

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Headroom: 360-1610 mm
  • Installation height: variable
  • Total width: 285-1535 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meters.

Technical Description

  • connection adapter of stainless steel, polished, with integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure, water inlet ¾” female
  • ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ball handle of stainless steel, length variable (min. 710 mm – max. 2040 mm)
  • slotted stainless steel rosette for passage through the suspended ceiling
  • double nipple ¾” of stainless steel
  • ceiling flange with 4 mounting holes of stainless steel, polished
  • connection pipe ¾“ of stainless steel, polished, length variable according to specification (total width min. 285 mm – max. 1535 mm)
  • ceiling flange with 4 mounting holes of stainless steel, polished
  • connection pipe ¾“ of stainless steel, polished, headroom variable according to specification (min. 360 mm – max. 1610 mm)
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • round rosette of stainless steel for installation of the shower head in the suspended ceiling
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height according to the standards listed below: lower edge of high-performance shower head 2200 mm (± 100 mm) height above floor level
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Do you have questions or would you like advice?

We will be happy to answer any questions and look forward to hearing from you.

You can reach us Monday to Thursday from 8 am to 5 pm and Friday from 8 am to 2 pm.


Leave this field blank


Oststraße 85
22844 Norderstedt


Do you have questions or need help? Send us an email and we’ll get in touch shortly.