Safety showers for hot environments

  • Material: stainless steel
  • Surface: polished
  • Total height: 1025 mm
  • Projection: 345 mm
  • Flow rate: 14 litres / minute
  • Water inlet: 1” male
  • Material: stainless steel
  • Surface: polished
  • Total height: 2330 mm
  • Projection: 600 mm
  • Flow rate: 50/75/110 l/min
  • Water inlet: 1” male
  • Material: stainless steel
  • Surface: polished
  • Total height: 2330 mm
  • Projection: 600 mm
  • Flow rate: 50/75/110 l/min
  • Water inlet: 1” male
  • Material: stainless steel
  • Surface: polished
  • Total height: 2330 mm
  • Projection: 600 mm
  • Flow rate: 50/75/110 l/min
  • Water inlet: 1” male

What is a safety shower for hot environments?

Safety showers for hot environments are self-draining safety- and eye showers, suitable for use in hot environments and tropical climates. They are to extinguish and decontaminate people after accidents. These showers are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

What types of installation are available for safety showers for hot environments?

  • floor mounted

What are the specifics of safety showers for hot environments?

In hot environments, the sun or the ambient temperature can heat the standing water in the pipes of the safety shower to very high temperatures. This can lead to a high risk of shock and scalding for the person seeking help when the shower is activated. For this reason, these models are designed so that the standing water can flow out of the standpipe, so that only tepid water is used in an emergency.

How can the risk of scalding be prevented for the person seeking help?

The valve is situated directly above the water inlet; the drainage outlet is then fitted above it so that standing water can drain away unhindered. The standpipe only fills with water when the shower is activated. The water flows out again when the valve is closed. This prevents standing water in the standpipe from overheating due to solar radiation and eliminates the risk of scalding for the person seeking assistance.

Safety through high-quality equipment

These Showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification- and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin. These showers can also be optionally equipped with an integrated BR 832 195 eye shower.

What standards apply to safety showers for hot environments?

Our safety showers for hot environments comply with the standards EN 15154-1:2006 (Body showers in laboratories), EN 15154-5:2019 (Body showers for locations other than laboratories / replacement for DIN 12899-3:2009) and ANSI Z358.1-2014. Showers with integrated eye shower comply the EN 15154-2:2006 and in USA the ANSI Z358.1-2014. Further national standards may have to be observed. In addition, company standards may need to be considered when selecting an safety shower for hot environments.

Do you have questions or would you like advice?

We will be happy to answer any questions and look forward to hearing from you.

You can reach us Monday to Thursday from 8 am to 5 pm and Friday from 8 am to 2 pm.

WE LOOK FORWARD TO YOUR MESSAGE

Leave this field blank

CONTACT

B-SAFETY GmbH
Oststraße 85
22844 Norderstedt

info(at)b-safety.com

Do you have questions or need help? Send us an email and we’ll get in touch shortly.