stainless steel, floor mounted

PremiumLine frostprotected heated body safety shower with eye shower

Article-No.: BR 816 095

Frost-proof heated emergency showers from B-SAFETY are equipped with a self-regulating trace heating cable and additional insulation. An integrated thermostat additionally secures the heating. The safety shower is covered from the outside with stainless steel sheets. This ensures maximum durability even in harsh industrial environments. Modular design with bolted valve covers ensures easy access to valves and connecting parts for maintenance. Triggering is via stainless steel pull rods or foot controls such as step grates or foot levers. Triggering is via stainless steel pull rods or foot controls such as step grates or foot levers. Freezing of these showers is not possible even under the most extreme conditions.

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 600 mm
  • Minimum flow pressure: 2.0 bar
  • Operating pressure: 2 to 8 bar
  • Flow rate body shower: 50 l/min (110 l/min)
  • Flow rate eye shower: 14 l/min
  • Water inlet: 1 ¼” male
  • Electrical supply: 230 V – 50 Hz

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463
  • GOST-TR-EX, Certificate-No. 0338358 0338358

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification- and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

Technical Description

  • base plate with 4 mounting holes of stainless steel, dimensions 200 x 200 mm
  • stand pipe 1 ¼” of stainless steel two-part, with bottom water inlet 1 ¼” female, total height 2300 mm
  • connection pipe ¾” of stainless steel, length 75 mm
  • ball valve 1 ¼” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel , length 700 mm
  • wall shower arm 1 ¼” of stainless steel, projection 600 mm
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • insulation made of mineral wool shape package, non-flammable, according to DIN 4102
  • heating by self-regulating trace tape, output 10 W/m, electrical supply 230 V – 50 Hz
  • outdoor thermostat and power-saving-circuit (shutdown of trace tape at 11°C, switch on at 4°C)
  • outer casing of the shower made of screwed stainless steel housing, easy to dismantle for maintenance work, including green/white indicator strips for better visibility of the shower
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 meter
  • integrated PremiumLine safety eye shower with two spray heads 45°, mounting height 950 mm, orientation of eye shower freely selectable on site
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1 to 5 bar flow pressure
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 meter
  • suitable for use in EX-Zones 1 & 2, all electrical parts explosion-proof, with risk assessment in accordance with industrial safety regulations concerning the non-electrical and electrical explosion protection
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Do you have questions or would you like advice?

We will be happy to answer any questions and look forward to hearing from you.

You can reach us Monday to Thursday from 8 am to 5 pm and Friday from 8 am to 2 pm.

WE LOOK FORWARD TO YOUR MESSAGE

Leave this field blank

CONTACT

B-SAFETY GmbH
Oststraße 85
22844 Norderstedt

info(at)b-safety.com

Do you have questions or need help? Send us an email and we’ll get in touch shortly.