Hand-held eye showers

Hand-held eye showers are mandatory first aid facilities for workplaces where employees may come into contact with hazardous substances, acids, alkalis, heat, flames and also extreme dirt. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

Showing all 5 results

ClassicLine hand-held eye shower with one spray head for table mounting

Article-No.: BR712020
Mounting typetable mounting
Version1 spray head
Materialbrass, plastic
Colourgrey, green, orange
Width (mm)65
Height (mm)240
Length/Depth (mm)65
Weight (kg)0.8
Hose length (mm)1500
Operating pressure (bar)1,5 – 5,0
Volume flow (l/min)7 +/-10% tolerance
Water connection1/2” female

ClassicLine hand-held eye shower with one spray head for wall- and table mounting

Article-No.: BR712025
Mounting typewall- and table mounting
Version1 spray head
Materialbrass, plastic
Colourgrey, green, orange
Width (mm)65
Height (mm)240
Length/Depth (mm)65
Weight (kg)0.8
Hose length (mm)1500
Operating pressure (bar)1,5 – 5,0
Volume flow (l/min)7 +/-10% tolerance
Water connection1/2” female

ClassicLine hand-held eye shower with one spray head for diagonal mounting / lab cell mounting

Article-No.: BR712035
Mounting typeFor diagonal mounting / lab cell mounting
Version1 spray head
Materialbrass, plastic
Colourgrey, green, orange
Width (mm)65
Height (mm)240
Length/Depth (mm)65
Weight (kg)0.8
Hose length (mm)1500
Operating pressure (bar)1,5 – 5,0
Volume flow (l/min)7 +/-10% tolerance
Water connection1/2” female

ClassicLine hand-held eye shower with one spray head 45° for table mounting

Article-No.: BR713020
Mounting typetable mounting
Version1 spray head
Materialbrass, plastic
Colourgrey, green, orange
Width (mm)65
Height (mm)270
Length/Depth (mm)65
Weight (kg)0,85
Hose length (mm)1500
Operating pressure (bar)1,5 – 5,0
Volume flow (l/min)7 +/-10% tolerance
Water connection1/2” female

ClassicLine hand-held eye shower with one spray head 45° for wall- and table mounting

Article-No.: BR713025
Mounting typewall- and table mounting
Version1 spray head
Materialbrass, plastic
Colourgrey, green, orange
Width (mm)65
Height (mm)270
Length/Depth (mm)65
Weight (kg)0,85
Hose length (mm)1500
Operating pressure (bar)1,5 – 5,0
Volume flow (l/min)7 +/-10% tolerance
Water connection1/2” female

Hand-held eye showers are mandatory first aid facilities for workplaces where employees may come into contact with hazardous substances, acids, alkalis, heat, flames and also extreme dirt. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

Table mounting Wall mounting Wall and table mounting Diagonal mounting.

Thanks to the unique design of this shower, two showers in one, it is possible to operate the Hand-held eye showers as a fixed Eye shower in the holder. However, it can also be easily removed from the holder to be used as a Hand-held shower for injured people lying on the floor.

The Hand-held eye showers can be used in several ways, e.g. for wall- and table mounting.

The Hand-held eye showers are equipped with B-SAFETY High-performance spray heads, which ensure that the water is distributed over a large area. As a result, the areas around the eyes are also supplied with water and the placement of the eyes in the water jet is unproblematic.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure. The backflow preventer built into the shower handle provides additional protection for the drinking water network.

Our hand-held eye showers comply with the standards EN 15154-2:2026-02 and ANSI Z358.1-2014. Further national standards may have to be observed. In addition, company standards may need to be considered when selecting an hand-held eye shower. Read more at https://www.b-safety.com/faq

Previously Viewed Products