Augendusche, Augenduschen, Augendusche für Bodenmontage, Augenduschen für Bodenmontage, Sicherheits-Augendusche, Sicherheits-Augenduschen, Augendusche mit Auffangbecken
floor mounted

ClassicLine eye-/face wash unit with bowl and lid

Article no.: BR 852 085

The B-SAFETY eye-/face wash units with bowl and lid have been developed for use in industry. These eye showers are completely protected against contamination by the cover. The eye showers are activated by pulling down the cover. The size and design of the eye shower allows excellent localization even in emergency situations.

Technical Specifications

  • Material: ABS plastic, stainless steel
  • Color: white, green
  • Dimensions (H x W): 1025 x 350 mm
  • Operating pressure: 2.5 to 5 bar
  • Flow rate: 14-20 l/min
  • Water inlet: 1 ¼” female
  • Water outlet: 1 ½” male

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two jet regulators, which not only meet the requirements of DIN EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure even water distribution. The limited, uniform and, above all, soft water jet is very suitable for rinsing out chemicals in the eye. Due to the limited water jet, the used water can be completely collected with this eye shower.

The correct jet height and desired flow rate are set on site via the integrated flow control valve. The eye shower is completely protected against dirt by the integrated hinged cover. This makes this shower the right solution for rough everyday industrial use. A sign for an eyewash device in accordance with DIN EN ISO 7010 with a viewing distance of 17 meters is attached to the cover.

Technical Description

  • base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, dimensions
    200 x 200 mm
  • stand pipe 1 ¼” of stainless steel, chemical resistant green powder coated, with top and bottom water inlet 1 ¼” female
  • housing, lid and bowl made of UV and impact resistant ABS plastics, water outlet 1 ½“ male
  • integrated protective cover against dust
  • actuation by pulling down the lid
  • ball valve 3/8“ of stainless steel, with lever actuation by lid, DIN-DVGW tested and certificated
  • aerators made of brass with a very limited spray pattern, chrome-plated
  • with integrated flow regulation valve 3/8” for setting the desired spray height and flow rate
  • inclusive sign for eye shower according to DIN EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metre
  • height 1025 mm, width 350 mm, depth 355 mm
  • according to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
  • according to ANSI Z358.1-2014 and DIN EN 15154-2:2006
  • DIN-DVGW tested and certificated

Do you have questions or would you like advice?

We will be happy to answer any questions and look forward to hearing from you.

You can reach us Monday to Thursday from 8 am to 5 pm and Friday from 8 am to 2 pm.

WE LOOK FORWARD TO YOUR MESSAGE

Leave this field blank

CONTACT

B-SAFETY GmbH
Oststraße 85
22844 Norderstedt

info(at)b-safety.com

Do you have questions about how we can help your company? Send us an email and we’ll get in touch shortly.